Terrace
Larch decking
Instalation
Supporting joists must be secured to the plates (floating installation), but it can be done with metal corners. Calculate the length of the board is necessary so that each edge of the terrace boards hitting the support bar. Best distance between logs 30 cm For fastening terrace boards are recommended to use stainless steel screws that are 2.5 times the thickness of the board. Board attached with screws pre-drilled holes, whose diameter should be slightly smaller than the diameter of the screw. To limit the strain terraced decking board in each mounting location should be secured to the joists at least two screws.
When laying the boards need to ensure expansion gap between 5-10 mm. When connected to a wall abutting boards need to leave a gap of 0,6 to 1,3 cm depending on the temperature during installation It will enable Decking made from larch to shrink and expand during the year following the changes in temperature and humidity. To ensure a uniform gap between the boards are used one workpiece
terrace is exposed to ultraviolet rays and unfavorable climatic conditions. As a result, the original color of the terrace becomes dull and gray.
If you would like to maintain the natural beauty and colour of your Decking this can be obtained by applying Linseed Oil once per year accentuating the colour and giving it a fresh looking apperance
Larch decking
Instalation
Supporting joists must be secured to the plates (floating installation), but it can be done with metal corners. Calculate the length of the board is necessary so that each edge of the terrace boards hitting the support bar. Best distance between logs 30 cm For fastening terrace boards are recommended to use stainless steel screws that are 2.5 times the thickness of the board. Board attached with screws pre-drilled holes, whose diameter should be slightly smaller than the diameter of the screw. To limit the strain terraced decking board in each mounting location should be secured to the joists at least two screws.
When laying the boards need to ensure expansion gap between 5-10 mm. When connected to a wall abutting boards need to leave a gap of 0,6 to 1,3 cm depending on the temperature during installation It will enable Decking made from larch to shrink and expand during the year following the changes in temperature and humidity. To ensure a uniform gap between the boards are used one workpiece
terrace is exposed to ultraviolet rays and unfavorable climatic conditions. As a result, the original color of the terrace becomes dull and gray.
If you would like to maintain the natural beauty and colour of your Decking this can be obtained by applying Linseed Oil once per year accentuating the colour and giving it a fresh looking apperance